{"title":"Rain Mitts","description":"","products":[{"product_id":"the-ultralight-rain-mitt","title":"Rain Mitt \"For The Trees\" PREORDER","description":"\u003cp\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e**GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED**\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e    Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e    Pattern by: Carlie London\u003cbr\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003eSizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471LE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Neon Yellow Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welded seams)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003c\/p\u003e","brand":"High Tail Designs","offers":[{"title":"SM\/MD","offer_id":12865376387138,"sku":"RM For The Trees SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":12884758757442,"sku":"RM For The Trees LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/products\/Mitt_Alt_2.jpg?v=1532991107"},{"product_id":"copy-of-the-ultralight-rain-mitt-lunar","title":"Rain Mitt \"Lunar\" PREORDER","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e**GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED**\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGarage Grown Gear review \u003c\/span\u003e\u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e    Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003c\/p\u003e\n\u003cp\u003eSizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471LE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Neon Yellow Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welded seams)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003c\/p\u003e","brand":"High Tail Designs","offers":[{"title":"SM\/MD","offer_id":12865510834242,"sku":"RM Lunar SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":13019972403266,"sku":"RM Lunar LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/products\/Lunar_Mitt_Alt_2.jpg?v=1532992199"},{"product_id":"the-ultralight-rain-mitt-horsehead","title":"Rain Mitt \"Horsehead\" PREORDER","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e**GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED**\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e    Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003eSizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471LE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Neon Yellow Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welded seams)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003c\/p\u003e","brand":"High Tail Designs","offers":[{"title":"SM\/MD","offer_id":12865517715522,"sku":"RM Horsehead SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":12884781269058,"sku":"RM Horsehead LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/products\/Horsehead_Mitt_Alt_2.jpg?v=1532992283"},{"product_id":"the-ultralight-rain-mitt-for-the-brids","title":"Rain Mitt \"For The Birds\" PREORDER","description":"\u003cp\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e**GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED**\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e    Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e    Pattern by Caman \"Bones\" Skelton\u003cbr\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003e Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471LE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Neon Yellow Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welded seams)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003c\/p\u003e","brand":"High Tail Designs","offers":[{"title":"SM\/MD","offer_id":12865521188930,"sku":"RM For The Birds SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":12884715077698,"sku":"RM For The Birds LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/products\/For_the_Birds_Mitt_Alt_2.jpg?v=1532992409"},{"product_id":"the-ultralight-rain-mitt-canary-seafoam","title":"Rain Mitt \"Canary Seafoam\" PREORDER","description":"\u003cp\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e**GLOVE PULLS AND WRIST SHOCK CORD ARE NOW BLACK.  SOME HARDWARE HAS CHANGED**\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e    Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003e    Sizing: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471LE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Neon Yellow Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welded seams)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"High Tail Designs","offers":[{"title":"SM\/MD","offer_id":12865526071362,"sku":"RM Canary Seafoam SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":12884679622722,"sku":"RM Canary Seafoam LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/products\/Canary_Seafoam_Mitt_Alt_2_f4d9c8bc-b5c1-4dfe-bf57-a62f1dfe3f31.jpg?v=1533055134"},{"product_id":"limited-edition-rain-mitt-celestial-halloween-by-ash-ryan","title":"Limited Rain Mitt \"Celestial Halloween\" PREORDER","description":"\u003cp\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat Your Purchase Supports:\u003c\/b\u003e\u003cspan\u003e This series is an artist collaboration\u003c\/span\u003e\u003cspan\u003e.  The artist collects \u003c\/span\u003e\u003cstrong\u003e15%\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eof the proceeds from the sale of their designs, keeping them hard at work doing what they love!  Support independent art!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e     Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003e    Sizing: \u003cbr\u003eThese mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471 LSE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Black Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welding)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ash Ryan","offers":[{"title":"SM\/MD","offer_id":40454554026050,"sku":"RM Celestial Halloween Ryan SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":40454554058818,"sku":"RM Celestial Halloween Ryan LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/files\/20231005_233216.jpg?v=1696622659"},{"product_id":"ultralight-rain-mitt-ink","title":"Rain Mitt \"Ink\" PREORDER","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e     Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003eSizing: \u003cbr\u003eThese mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. \u003cbr\u003e\u003cbr\u003eMeasure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A SM\/MD size will fit most people with a base measurement of 6.5\" - 7.75\". A LG\/XL size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        SM\/MD: 1.07 oz \/ 30 grams\u003cbr\u003e        LG\/XL: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471LSE Dyneema Tape\u003cbr\u003e        1\/16\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Black Nylon Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welded            seams)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003c\/p\u003e","brand":"High Tail Designs","offers":[{"title":"SM\/MD","offer_id":40573128704066,"sku":"RM Ink SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":40573128736834,"sku":"RM Ink LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/files\/20231114_213840.jpg?v=1700133782"},{"product_id":"ultralight-rain-mitt-plain","title":"Rain Mitt \"Plain\" PREORDER","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e     Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003eSizing: \u003cbr\u003eThese mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. \u003cbr\u003e\u003cbr\u003eMeasure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A SM\/MD size will fit most people with a base measurement of 6.5\" - 7.75\". A LG\/XL size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        SM\/MD: 1.07 oz \/ 30 grams\u003cbr\u003e        LG\/XL: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471LSE Dyneema Tape\u003cbr\u003e        1\/16\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Black Nylon Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welded            seams)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003c\/p\u003e","brand":"High Tail Designs","offers":[{"title":"SM\/MD","offer_id":40573130276930,"sku":"RM Plain SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":40573130309698,"sku":"RM Plain LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/files\/20231114_213542.jpg?v=1700133674"},{"product_id":"rain-mitt-forest-mushroom-by-ash-ryan","title":"Rain Mitt \"Forest Mushroom\" PREORDER","description":"\u003cp\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat Your Purchase Supports:\u003c\/b\u003e\u003cspan\u003e This series is an artist collaboration\u003c\/span\u003e\u003cspan\u003e.  The artist collects \u003c\/span\u003e\u003cstrong\u003e15%\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eof the proceeds from the sale of their designs, keeping them hard at work doing what they love!  Support independent art!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e     Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003e    Sizing: \u003cbr\u003eThese mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471 LSE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Black Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welding)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ash Ryan","offers":[{"title":"SM\/MD","offer_id":40766210408514,"sku":"RM Forest Mushroom SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":40766210441282,"sku":"RM Forest Mushroom LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/files\/20240201_211455.jpg?v=1707766060"},{"product_id":"rain-mitt-botany-poster-by-ash-ryan","title":"Rain Mitt \"Botany Poster\" PREORDER","description":"\u003cp\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat Your Purchase Supports:\u003c\/b\u003e\u003cspan\u003e This series is an artist collaboration\u003c\/span\u003e\u003cspan\u003e.  The artist collects \u003c\/span\u003e\u003cstrong\u003e15%\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eof the proceeds from the sale of their designs, keeping them hard at work doing what they love!  Support independent art!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e     Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003e    Sizing: \u003cbr\u003eThese mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 3.3 oz\/sqyd Challenge Sailcloth TX95\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471 LSE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Black Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welding)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ash Ryan","offers":[{"title":"SM\/MD","offer_id":40766215159874,"sku":"RM Botany Poster Ryan SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":40766215192642,"sku":"RM Botany Poster Ryan LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/files\/20240201_211044.jpg?v=1707765909"},{"product_id":"rain-mitt-nocturna-by-ash-ryan","title":"Rain Mitt \"Nocturna\" PREORDER","description":"\u003cp\u003e\u003cstrong\u003ePREORDER \u003c\/strong\u003eDyneema items ship in September | Items made to order | Made in Philly | Est. 2018\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat Your Purchase Supports:\u003c\/b\u003e\u003cspan\u003e This series is an artist collaboration\u003c\/span\u003e\u003cspan\u003e.  The artist collects \u003c\/span\u003e\u003cstrong\u003e15%\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eof the proceeds from the sale of their designs, keeping them hard at work doing what they love!  Support independent art!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eGarage Grown Gear review \u003ca href=\"https:\/\/www.garagegrowngear.com\/blogs\/gear-reviews\/ultralight-rain-mitts-high-tail-designs\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePerfect for cold, rainy stretches, The Ultralight Rain Mitts keep your paws dry.  Warm also, when used with a liner glove. We recommend lightweight Possum-down gloves. Using Dyneema Composite Fabric in conjunction with Dyneema Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  \u003cbr\u003e    \u003cbr\u003e    *Due to dye-sublimation, colors may vary slightly.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e     Designed, printed and sewn in \u003c\/span\u003e\u003cspan\u003ePhiladelphia, PA \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eCare Instructions: Clean dust and dirt from Mitts before storing.  Store out of direct sunlight and moisture.\u003cbr\u003e        Hand wash with a gentle soap.  \u003cbr\u003e        Do not iron.  \u003cbr\u003e        Do not wring.  \u003cbr\u003e        Drip-dry in shade. \u003cbr\u003e        Do not bleach. \u003cbr\u003e    \u003cbr\u003eSpecs: \u003cbr\u003e    Dimensions: \u003cbr\u003e        Sm\/Md: ~ 11.4\" x 7.4\" \u003cbr\u003e        Lg\/Xl: ~ 12.2\" x 7.5\"\u003cbr\u003e\u003cbr\u003e    Sizing: \u003cbr\u003eThese mitts are meant to go over liner gloves. They will work without them but are much more comfortable and warm if using a liner glove. They may fit a little large if not using liners. Measure from the base of your palm to the tip of your middle finger.  This is the base measurement we use for sizing. A Sm\/Md size will fit most people with a base measurement of 6.5\" - 7.75\". A Lg\/Xl size will fit most people with a base measurement of 7.5\" - 8.25\".\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e    Weight:  \u003cbr\u003e        Sm\/Md: 1.07 oz \/ 30 grams\u003cbr\u003e        Lg\/Xl: 1.21 oz \/ 34 grams\u003cbr\u003e        \u003cbr\u003e    Materials: \u003cbr\u003e        Sublimated 2.92 Dyneema Hybrid Fabric\u003cbr\u003e        Sublimated 1.43 oz\/sqyd Dyneema Composite Fabric\u003cbr\u003e        3M 9471 LSE Dyneema Tape\u003cbr\u003e        1\/8\" Shock Cord\u003cbr\u003e        1\/2\" Firm Nylon Grosgrain Ribbon\u003cbr\u003e        2 mm Black Spectra Glove Pull\u003cbr\u003e        Cord Toggle\u003cbr\u003e        Cord Pull\u003cbr\u003e        \u003cbr\u003e\u003cbr\u003e    Features:\u003cbr\u003e        Extremely Water-Resistant (as close to waterproof as you can get without welding)\u003cbr\u003e        Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)\u003cbr\u003e        One-handed wrist cinch fastener to tighten\/loosen each mitt\u003cbr\u003e        Fully-Taped Seams\u003cbr\u003e        Large glove pull on each mitt for ease of donning\u003cbr\u003e        Shock cord wrist cinch to prevent water ingress\u003cbr\u003e        Loops for attaching mitten hooks\u003cbr\u003e        Unique Colorways\u003cbr\u003e        Ultralight Construction\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ash Ryan","offers":[{"title":"SM\/MD","offer_id":42222149959746,"sku":"RM Nocturna Ryan SM\/MD","price":105.0,"currency_code":"USD","in_stock":true},{"title":"LG\/XL","offer_id":42222149992514,"sku":"RM Nocturna Ryan LG\/XL","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/files\/20250605_205826.jpg?v=1749766180"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/9278\/5986\/collections\/20181024_213616.jpg?v=1554947566","url":"https:\/\/hightaildesigns.pro\/collections\/rain-mitts.oembed","provider":"High Tail Designs","version":"1.0","type":"link"}